Applicable to: Pulsar Plus E, Pulsar Pro NA, Copper SB, Pulsar Plus Socket, Pulsar Plus
Pulsar Plus E – PUP2 – Software version 6.11.16 25 Nov 2025
- The charger now supports new advanced charging schedules, including:
- Increased number of configurable schedules.
- Ability to temporarily disable schedules without deleting them.
- Creation of one-time schedules.
- Option to define schedules targeting specific amounts of energy charged.
- Increased Bluetooth connection security, the charger now requires a PIN to connect via Bluetooth. The PIN can be found on the charger information page in the Wallbox App.
- We have added an over current protection feature that will automatically stop the charge when the charging current set by the charger is surpassed.
- Extended implementation of OCPP FirmwareUpdate to enable software downloads from remote locations.
- Added support for installing Central System Root Certificates via the Wallbox App for OCPP 1.6j Security Profile Level 2.
- Resolved an issue that could cause the charger to not react when the EV gun is plugged.
- We have optimized the communication with the Wallbox backend, which will result in lower data consumption for mobile connected chargers.
- Introduced an optional periodic reboot feature to improve charger uptime. This functionality can be enabled through a dedicated OCPP configuration key.
- Fixed a problem where OCPP SmartCharging Profiles were not being applied correctly in certain cases.
- General bug fixes and stability improvements
Pulsar Pro NA – PUP3 – Software version 6.11.16 25 Nov 2025
- The charger now supports new advanced charging schedules, including:
- Increased number of configurable schedules.
- Ability to temporarily disable schedules without deleting them.
- Creation of one-time schedules.
- Option to define schedules targeting specific amounts of energy charged.
- Increased Bluetooth connection security, the charger now requires a PIN to connect via Bluetooth. The PIN can be found on the charger information page in the Wallbox App.
- We have added an over current protection feature that will automatically stop the charge when the charging current set by the charger is surpassed.
- Extended implementation of OCPP FirmwareUpdate to enable software downloads from remote locations.
- Added support for installing Central System Root Certificates via the Wallbox App for OCPP 1.6j Security Profile Level 2.
- Resolved an issue that could cause the charger to not react when the EV gun is plugged.
- We have optimized the communication with the Wallbox backend, which will result in lower data consumption for mobile connected chargers.
- Introduced an optional periodic reboot feature to improve charger uptime. This functionality can be enabled through a dedicated OCPP configuration key.
- Fixed a problem where OCPP SmartCharging Profiles were not being applied correctly in certain cases.
- General bug fixes and stability improvements
Copper SB – CPB1 – Software version 6.7.36 25 Nov 2025
- Fixed an issue that could cause the charger clock to fall out of sync, which in some cases prevented schedules from starting at the correct time.
- Resolved an issue that prevented setting a static IP address for the Ethernet connection.
- Fixed a problem where the charger would not complete the reboot process after a software update.
Pulsar Plus Socket – PSP1 – Software version 6.7.36 25 Nov 2025
- Fixed an issue that could cause the charger clock to fall out of sync, which in some cases prevented schedules from starting at the correct time.
- Fixed a problem where the charger would not complete the reboot process after a software update.
Pulsar Plus – PLP1 – Software version 6.7.36 25 Nov 2025
- Fixed an issue that could cause the charger clock to fall out of sync, which in some cases prevented schedules from starting at the correct time.
- Fixed a problem where the charger would not complete the reboot process after a software update.