You can link a Wallbox RFID card to a myWallbox account and use the RFID authentication method to access a charger.
RFID authentication requires the charger to have internet access to keep the information on authorized users updated. Please note that it may take up to 1 or 2 minutes for the charger to update user information after modifying the myWallbox Portal settings.
Adding or modifying a user’s Wallbox RFID card
- Log in to the portal by filling in your credentials, or register if you do not have an account yet.
- Click Users.
- Click the user for which you need to edit/add the Wallbox RFID card.
- In the RFID tab, click the numbers to edit them. Enter the 17 digits of the user’s Wallbox RFID card.
- Click Save. The message “RFID saved” displays that your RFID card numbers have been changed successfully. The user can authenticate to the charger using the registered card.
Adding or modifying your own Wallbox RFID card
- Log into the portal by filling in your credentials, or register if you do not have an account yet.
- Click the Profile icon and then Settings.
- Scroll down until the RFID section.
- Click the numbers to edit them and enter the 17 digits of your Wallbox RFID card.
- Click Save. The message “RFID saved” displays, that your RFID card numbers have been changed successfully. Your RFID card is now associated with your account, and you will be able to authenticate to your charger.