You can link a Wallbox RFID card to a myWallbox account and use the RFID authentication method to access a charger.
RFID authentication requires the charger to have internet access to keep the information on authorized users updated. Please note that it may take up to 1 or 2 minutes for the charger to update user information after modifying the myWallbox Portal settings.
Adding or modifying a user’s Wallbox RFID card
- Log in to the portal by filling in your credentials, or register if you do not have an account yet.
- Click Users.
- Click the user for which you need to edit/add the Wallbox RFID card.
- In the RFID tab, click the numbers to edit them. Enter the 17 digits of the user’s Wallbox RFID card.
- Click Save. The message « RFID saved » displays that your RFID card numbers have been changed successfully. The user can authenticate to the charger using the registered card.
Adding or modifying your own Wallbox RFID card
- Log into the portal by filling in your credentials, or register if you do not have an account yet.
- Click the Profile icon and then Settings.
- Scroll down until the RFID section.
- Click the numbers to edit them and enter the 17 digits of your Wallbox RFID card.
- Click Save. The message « RFID saved » displays, that your RFID card numbers have been changed successfully. Your RFID card is now associated with your account, and you will be able to authenticate to your charger.