Welcome to Wallbox Support

Browse through our FAQs to find answers to commonly raised questions. 

How to make a scheduled charging session with your Pulsar/Pulsar Plus

Schedule your electric vehicle recharges at your convenience with your Pulsar or Pulsar Plus.

Introduction

Sometimes it is very important to ensure that your charging station charges only at a certain time during the day or night. The possible reasons include:

  • You have different electricity tariffs depending on the time of day
  • You want to charge only during periods of low consumption of other devices in your household/facility

All our chargers allow this functionality as a part of the full management of the charging experience we want to provide to our end users.

Set up a schedule in your charger

Below you will find the instructions showing how to implement this useful functionality in your charger. Please ensure that the EV gun is not plugged into the car when making the scheduled charge.

1.- Open the Wallbox app.

2.- If you are not automatically logged in please fill in your credentials:

3.- Once logged in select your charger:

4.- Your app will then link to your charger. The HALO of your charger will turn purple during the synchronisation process (only Pulsar):

5.- In the app, press the clock button:

6.- The schedule menu will then appear. Select the start and end time. Then press save. Once this is done your charging session will be scheduled.

7- If you connect your car and a schedule is active your Pulsar will show a turquoise blinking colour:

The Wallbox Academy Training & Certification Solution is a one-day immersion experience at Wallbox facilities in Barcelona or Madrid or at the facilities of our partners… Receive an overview of all Wallbox’s products and services. If you would like further information, please do not hesitate to contact us

Updated on 08/10/2020

Was this article helpful?

Related Articles

Leave a Comment