Welcome to Wallbox Support

Browse through our FAQs to find answers to commonly raised questions. 

How to update the firmware of your Copper SB

Keep your charger always updated to enjoy and take advantage of all the functionalities it offers you.

1.- Introduction

Wallbox always wants to provide its customers the best products, services and user experience. Therefore, we consider it a must that all chargers installed at our clients’ premises are always up to date in order to:

  • Ensure the perfect and robust behaviour of all our customers’ Wallbox devices
  • Give our customers the possibility to access all new functionalities that Wallbox develops

All our chargers allow this functionality as a part of the full management of the charging experience we want to provide to our end users.

2.- Firmware update of a Copper SB charger:

Below you will find the instructions showing how to update your charger’s firmware. Before starting, please make sure you have the latest version of the Wallbox app downloaded on your phone by checking your mobile phone’s App Store or Play Store. Also, please ensure that the EV gun is not plugged into the car during this process.

Ensure that the charger is connected to Wi-Fi before proceeding with the update.

1.- Open the Wallbox app.

2.- If you are not automatically logged in please fill in your credentials:

3.- Once logged in select your charger:

4.- Your app will then link to your charger.

5.- In the app, press the Configuration icon:

6.- If there is an update available, a message at the bottom of the screen will appear. Please click this message:

7- The App will show all the relevant information during the process:

During the update process, the charger’s HALO will turn white and rotate clockwise. Once the update is finished, a notification in the app will appear stating so.

VERY IMPORTANT: Never turn off the charger, nor log out of the app during the update process. The interruption of this process will leave the charger inoperative and a visit from a technician would be necessary.

8.- Whenever you want to check the firmware version of your charger, you can do this in the Wallbox app. In the Configuration menu, select “Charger Info”, and you will see the current version of your device:

The Wallbox Academy Training & Certification Solution is a one-day immersion experience at Wallbox facilities in Barcelona or Madrid or at the facilities of our partners… Receive an overview of all Wallbox’s products and services. If you would like further information, please do not hesitate to contact us

Updated on 18/02/2021

Was this article helpful?

Related Articles