Pulsar Plus integrates a LED system that reflects its charging activity, communicates its status, and reports eventual errors. The colour coding has been designed to be simple, easy to understand, and intuitive. The LED halo is easily recognizable on the facade of your Pulsar Plus.
The LED will match the colour of the myWallbox app charging wheel when connected to your charger.
GENERAL INFORMATION
LIGHT BLUE (blinking)
Your electric vehicle is waiting for power assignation.
GREEN/WHITE/LIGHT BLUE (all three colours blinking alternatively) – Stand-alone mode
Your Pulsar Plus could not be paired with the other chargers of your Power sharing installation. Please refer to the Power Sharing article for more information.
TURQUOISE – Standby mode
Your electric vehicle is ready to be charged, the charge session has been paused, or your vehicle is fully charged.
TURQUOISE (blinking) – Scheduled charge ready mode
Your Pulsar’s scheduled charging session is ready to start (learn more about scheduled charging sessions in this related article: How to make a scheduled charging session with your Pulsar Plus).
DARK BLUE (slow blinking) – Charging mode
The LED indicator will show a blinking dark blue light once the secure connection between your charger and your vehicle has been established, and the charging process is in progress.
YELLOW – Locked mode
This colour will appear on your charger when you lock your Pulsar Plus through the myWallbox app or the Portal. Your EV is not charging when the charger is in Locked mode.
If more than one user is assigned to your charger and the auto-lock is enabled (which is the case by default), the charger will be locked automatically after a few minutes of the absence of any user activity. You can learn more about the locking system of your charger with this article.
Once the charger is unlocked, it will display the turquoise colour (ready mode).
RED – Error mode
Your charger is in fault mode. Do not try to charge in this condition. The detected problem could emanate from your charger, electric vehicle, or the electric grid system. Contact Wallbox Service so our team can advise you on the best follow-up procedure.
ORANGE (blinking) – MID Configuration error
The communication between your Pulsar Plus and your MID meter has failed. You can refer to this article for more information on installing and configuring your MID meter.
WHITE (high-speed roulette movement) – Software update
The software of your charger is being updated. Do not perform any action during this process or your Pulsar might get damaged.
POWER SHARING ERROR SIGNALING
Your Pulsar Plus can also display a signal if an error occurs when used for Power Sharing. Find below the related colours that can display:
LIGHT BLUE (blinking)
Your electric vehicle is waiting for power assignation.
GREEN/WHITE/LIGHT BLUE (all three colours blinking alternatively) – Stand-alone mode
Your Pulsar Plus could not be paired with the other chargers of your Power sharing system. Please refer to the Power Sharing article for more information.
TURQUOISE – Standby mode
Your electric vehicle is ready to be charged, the charge session has been paused, or your vehicle is fully charged.
POWER BOOST NOTIFICATION
Your Pulsar Plus can also display a signal if an error occurs when used with Power Boost. Find below the related colours that can display:
LIGHT BLUE (blinking)
Your electric vehicle is waiting for power assignation.